Posted   by 

U-Boot 2009.01 Driver



Periferica audio su bus High Definition Audio: Drivers List. 6 drivers are found for ‘Periferica audio su bus High Definition Audio’. To download the needed driver, select it from the list below and click at ‘Download’ button. This download provides the Realtek. High Definition Audio Driver for the 3.5mm audio jack on Intel® NUC Kit. This audio driver is required if you plan to connect a microphone or headset to the audio jack. The package provides the installation files for AMD High Definition Audio Bus Driver version 15.20.0.1. In order to manually update your driver, follow the steps below (the next steps). This download provides the Realtek. High Definition Audio Driver for the 3.5mm audio jack on the Intel® NUC Kits NUC8i7HxKx. This audio driver is required if you plan to connect a microphone or headset to the audio jack or want to use the TOSLINK connection on the back of the Intel NUC. Download periferica audio su bus high definition audio driver download. The HD Audio bus driver does not provide: An interface for programming a DSP or additional registers that are not defined in the Intel High Definition Audio Specification. Prioritized bandwidth management. During device enumeration, the HD Audio bus driver detects the codecs that are attached to the HD Audio controller's HD Audio Link.

U-boot
  1. U-boot 2009.01 Driver Download
  2. U-boot 2009.01 Driver Win 7
  3. U-boot 2009.01 Drivers
U-Boot 2009.01 Driver
Mar 17th, 2018
Never
Not a member of Pastebin yet?Sign Up, it unlocks many cool features!

U-boot 2009.01 Driver Download

  1. U-Boot Source Code. The current source code is available through the git repository at gitlab.denx.de.; Released Versions (and some special snapshots) are available from the DENX file server through HTTPS or FTP.; gitlab.denx.de also hosts the Custodian git trees; you can see the list of all custodian repositories here.; An attempt to collect a list of all U-Boot authors can be found here.
  2. 0.740000 Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled 0.750000 console ttyS0 disabled 0.780000 serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, basebaud = 125 00000) is a 16550A.

Qq player free download for windows 7. U-Boot for i.MX51 Based Designs, Rev. 0 Freescale Semiconductor 3 Getting the U-Boot Source Code 3 Getting the U-Boot Source Code The U-Boot source code is sent along with the Linux Board Support Package (BSP) for the i.MX51 EVK. Looks like I've got the same kind of firmware (U-Boot 2009.01 SXPPCM460EX SX3.2.0330-82-EMC) on my switch (probably got it from the same eBay dealer). I found the way to configure the eth0 interface and was able to telnet into it, but it gives me the same interface/commands as the serial one. Open Menu / drivers/spi. Parent directory: Kconfig: 11194 bytes: Makefile: 2290 bytes: alteraspi.c: 4657 bytes. U-boot v2019.01 Top powered by Elixir 2.

Windows

  1. ar7100_ddr_initial_config(269) exit!
  2. sri
  3. WRT160NL u-boot version: 1.0.0
  4. Reserving 277k for U-Boot at: 81fb8000
  5. Reserving 44 Bytes for Board Info at: 81f87fd4
  6. Reserving 128k for boot params() at: 81f67fb0
  7. Now running in RAM - U-Boot at: 81fb8000
  8. flash size 8MB, sector count = 128
  9. *** Warning - bad CRC, using default environment
  10. In: serial
  11. Err: serial
  12. ag7100 get ethaddr for device eth0
  13. --------***** Get the RTL8306SD Manufactory ID=34dc *****-------
  14. Reg5: speed=0 nway=0 duplex=0
  15. Reg1: a1=7fd9 a2=2890 a3=115c a4=2890
  16. Reg1: a1=7fd9 a2=2890 a3=115c a4=2890
  17. eth0: 00:23:69:ed:9f:ad
  18. eth0
  19. ## Booting image at bf04003c ..
  20. Created: 2018-01-26 17:09:26 UTC
  21. Image Type: MIPS Linux Kernel Image (gzip compressed)
  22. Load Address: 80060000
  23. Verifying Checksum .. OK
  24. kernel: org len = 1209269, new len = 1245184
  25. ## Transferring control to Linux (at address 80060000) ..
  26. Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
  27. Starting kernel at 80060000..
  28. [ 0.000000] Linux version 3.18.91 (cezary@eko.one.pl) (gcc version 4.8.3 (Ope nWrt/Linaro GCC 4.8-2014.04 unknown) ) #4 Fri Jan 26 18:05:42 CET 2018
  29. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  30. [ 0.000000] Determined physical RAM map:
  31. [ 0.000000] Initrd not found or empty - disabling initrd
  32. [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
  33. [ 0.000000] Early memory node ranges
  34. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
  35. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  36. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  37. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 8128
  38. [ 0.000000] Kernel command line: board=WRT160NL console=ttyS0,115200 rootfst ype=squashfs,jffs2 noinitrd
  39. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  40. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  41. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  42. [ 0.000000] Readback ErrCtl register=00000000
  43. [ 0.000000] Memory: 28260K/32768K available (2643K kernel code, 148K rwdata, 552K rodata, 232K init, 193K bss, 4508K reserved, 0K cma-reserved)
  44. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  45. [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.000 MHz
  46. [ 0.000000] Calibrating delay loop.. 265.42 BogoMIPS (lpj=1327104)
  47. [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  48. [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  49. [ 0.100000] MIPS: machine is Linksys WRT160NL
  50. [ 0.660000] NET: Registered protocol family 2
  51. [ 0.660000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  52. [ 0.660000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  53. [ 0.670000] TCP: Hash tables configured (established 1024 bind 1024)
  54. [ 0.680000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  55. [ 0.690000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  56. [ 0.700000] futex hash table entries: 256 (order: -1, 3072 bytes)
  57. [ 0.710000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  58. [ 0.720000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORIT Y) (c) 2001-2006 Red Hat, Inc.
  59. [ 0.740000] io scheduler noop registered
  60. [ 0.740000] io scheduler deadline registered (default)
  61. [ 0.740000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  62. [ 0.780000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 125 00000) is a 16550A
  63. [ 0.790000] console [ttyS0] enabled
  64. [ 0.790000] bootconsole [early0] disabled
  65. [ 0.800000] m25p80 spi0.0: found mx25l6405d, expected m25p80
  66. [[ 82.590000] random: nonblocking pool is initialized

U-boot 2009.01 Driver Win 7

U-boot 2009.01 driver download

U-boot 2009.01 Drivers

I made a new U-boot on the NAND but it doesn't work correctly.
I followed the steps from
http://alokprasad.spaces.live.com/blog/cns!48CAA8345A2495B1!374.entry
I don't know what I can do now. Please help me.
Greetings
Jan
Downunder the whole boot log:

U-Boot 2009.01 (Dec 22 2009 - 10:04:02)
DRAM: 128 MB
NAND: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xa1 (Micron NAND
128MiB 1,8V 8-bit)
Bad block table found at page 65472, version 0x01
Bad block table found at page 65408, version 0x01
nand_read_bbt: Bad block at 0x00ec0000
nand_read_bbt: Bad block at 0x01160000
128 MiB
*** Warning - bad CRC or NAND, using default environment
In: serial
Out: serial
Err: serial
ARM Clock : 300000000 Hz
DDR Clock : 150000000 Hz
Ethernet PHY: GENERIC @ 0x07
Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x400000, size 0x800000
8388608 bytes read: OK
NAND read: device 0 offset 0x200000, size 0x200000
2097152 bytes read: OK
AIS U-BootLoader is already flashed
## Booting kernel from Legacy Image at c0700000 ..
Image Name: Linux-2.6.32-rc6
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1933904 Bytes = 1.8 MB
Load Address: c0008000
Entry Point: c0008000
Verifying Checksum .. OK
Loading Kernel Image .. OK
OK
Starting kernel ..
Linux version 2.6.32-rc6 (root@vpn) (gcc version 4.3.3 (Sourcery G++
Lite 2009q1-203) ) #1 PREEMPT Mon Dec 21 18:43:58 IST 2009
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: OMAPL 138 Hawkboard.org
Memory policy: ECC disabled, Data cache writeback
DaVinci da850/omap-l138 variant 0x0
Built 1 zonelists in Zone order, mobility grouping on. Total pages:
32512
Kernel command line: mem=128M console=ttyS2,115200n8 root=/dev/ram0 rw
initrd=0xc1180000,8M
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 117460KB available (3684K code, 272K data, 148K init, 0K
highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
Hierarchical RCU implementation.
NR_IRQS:245
Console: colour dummy device 80x30
Calibrating delay loop.. 149.50 BogoMIPS (lpj=747520)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
DaVinci: 144 gpio irqs
regulator: core version 0.5
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource timer0_1
musb_hdrc: version 6.0, cppi4.1-dma, (host+peripheral), debug=0
Waiting for USB PHY clock good..
musb_hdrc: USB OTG mode controller at fee00000 using DMA, IRQ 58
musb_hdrc musb_hdrc: MUSB HDRC host driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs..
rootfs image is not initramfs (junk in compressed archive); looks like
an initrd
Freeing initrd memory: 8192K
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 245
io scheduler noop registered
io scheduler anticipatory registered (default)
da8xx_lcdc da8xx_lcdc.0: GLCD: Found VGA_Monitor panel
Console: switching to colour frame buffer device 80x30
Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x1c42000 (irq = 25) is a 16550A
serial8250.0: ttyS1 at MMIO 0x1d0c000 (irq = 53) is a 16550A
serial8250.0: ttyS2 at MMIO 0x1d0d000 (irq = 61) is a 16550A
console [ttyS2] enabled
brd: module loaded
ahci ahci: forcing PORTS_IMPL to 0x1
ahci ahci: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc
scsi0 : ahci
ata1: SATA max UDMA/133 irq 67
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xa1 (Micron NAND 128MiB
1,8V 8-bit)
Bad block table not found for chip 0
Bad block table not found for chip 0
Scanning device for bad blocks
Bad eraseblock 118 at 0x000000ec0000
Bad eraseblock 139 at 0x000001160000
Creating 5 MTD partitions on 'davinci_nand.1':
0x000000000000-0x000000020000 : 'u-boot env'
0x000000020000-0x000000040000 : 'UBL'
0x000000040000-0x0000000c0000 : 'u-boot'
0x000000200000-0x000000400000 : 'kernel'
0x000000400000-0x000008000000 : 'filesystem'
davinci_nand davinci_nand.1: controller rev. 2.5
console [netcon0] enabled
netconsole: network logging started
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci ohci.0: DA8xx OHCI
ohci ohci.0: new USB bus registered, assigned bus number 2
ohci ohci.0: irq 59, io mem 0x01e25000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver..
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
g_ether gadget: using random self ethernet address
g_ether gadget: using random host ethernet address
usb0: MAC 96:b8:01:0e:aa:99
usb0: HOST MAC 72:f0:f8:a6:47:e4
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
g_ether gadget: g_ether ready
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
watchdog watchdog: heartbeat 60 sec
cpuidle: using governor ladder
cpuidle: using governor menu
davinci_mmc davinci_mmc.0: Using DMA, 4-bit mode
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.21.
No device for DAI tlv320aic3x
asoc: tlv320aic3x <-> davinci-i2s mapping ok
ALSA device list:
#0: DA850/OMAP-L138 EVM (tlv320aic3x)
TCP cubic registered
NET: Registered protocol family 17
Clocks: disable unused emac
Clocks: disable unused spi1
davinci_emac_probe: using random MAC addr: 36:0e:69:cc:0b:dc
emac-mii: probed
ata1: SATA link down (SStatus 0 SControl 300)
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 8192KiB [1 disk] into ram disk.. done.
VFS: Mounted root (ext2 filesystem) on device 1:0.
Freeing init memory: 148K
HawkBoard (v1.15.2) : System initialization..
Kernel release : Linux 2.6.32-rc6
Kernel version : #1 PREEMPT Mon Dec 21 18:43:58 IST 2009
Mounting /proc : [SUCCESS]
Mounting /sys : [SUCCESS]
Mounting /dev : [SUCCESS]
Mounting /dev/pts : [SUCCESS]
Enabling hot-plug : [SUCCESS]
Populating /dev : [SUCCESS]
Mounting other filesystems : eth0: attached PHY driver [Generic PHY]
(mii_bus:phy_addr=1:07, id=7c0f1)
[SUCCESS]
Starting syslogd : [SUCCESS]
Setting Local and Eth0 Interface : Jan 1 00:00:04 HawkBoard
syslog.info syslogd started: BusyBox v1.15.2